GIZUMO Japan Motors

Car · Mazda

Autozam AZ-1: Gullwing doors, kei-car footprint

Gullwing doors, kei-car footprint. The Autozam AZ-1 (known by the framecode PG6SA) is a sports car which was manufactured by Mazda from October 1992 to October 1994 and sold under its Autozam brand. Suzuki provided the engine as well as the inspiration for the design.

Autozam AZ-1 model reference
Mazda AZ-1(ja:マツダ・AZ-1),Mazda Museum
MAZDA AZ-1.JPG · Taisyo · CC BY-SA 3.0
Unmodified image file; scaled to fit the page. Photo remains under its stated license.

At a glance

MakerMazda
TypeCar
Engine typeGasoline engine
Length3,295 mm
Width1,395 mm
Height1,150 mm
Wheelbase2,235 mm
Total produced4,392

Suzuki prototypes

The proposal for the AZ-1 goes as far back as 1985 when Suzuki created the Suzuki RS/1 as a mid-engine sports car project for volume production. Suzuki's design for the Tokyo Motor Show was a fully functional car with a front/rear weight distribution of 45:55, powered by a modified 1.3-litre G13B engine borrowed from the Cultus GTi.

This was followed up by the Tatsumi Fukunaga-designed RS/3, unveiled for the 1987 Tokyo Motor Show. This version of the car retained many of its design features of the predecessor, but many of its design features were modified to meet Japanese safety regulations as well as for practicality. However, the project was abandoned in favour of the roadster project they had been working on, named later the Cappuccino.

Mazda's design team, led by Toshihiko Hirai, who was also responsible for the MX-5, took over the design project, despite having a limited budget and capacity.

Mazda prototypes

The redesigned cars, constructed in tube frame with floors and bulkheads constructed from aluminium honeycomb, clad in three different body styles constructed in fibreglass. The cars were constructed around the Kei car regulations of the time (maximum length 126 inches (3,200 mm), maximum engine capacity 550 cc), until this was changed for the following March, hence its model name, AZ-550 Sports.

First introduced at the 1989 Tokyo Motor Show as the AZ-550 with three versions.

The Type A is a red sports car with pop-up headlights, front air vent and gull-wing doors.

The Type B, themed as "High-tuned pure sports", was inspired by the trends in the tuning industry and in current concept car design, featuring greenhouse pyramid roof without a rearward sweep to the C-pillar. It had a racing car inspired interior, unlike Type A, it was aiming for the rough and spartan look and was the only model that had a more conventional forward door hinging. It featured a pair of bulging headlamps and incorporated dual mufflers.

The Type C, has a more distinctive body design as it was inspired by Mazda's Group C racing sports-prototype cars, incorporating its signature colour scheme of blue on white and the number it bore at the 24 hours of Le Mans. Featuring a bigger air intake than the former two, venting to the forward-positioned radiator and exits it along the front rim of the cowl. There are many design cues typical to an endurance racer such as the wing mirror and BBS style brake-cooling wheel discs. Compared to the Type B, this version is far more spartan.

Pre-production

As the cars were well received by the visiting public and the motoring press, Mazda executives decided on production of the car. Although Type C was the better received of the three, Type A was given the green light by executives as they believed that it would be the one most commercially accepted by the buying public. The Type A would only receive a minor design alteration prior to production, as the pop-up headlights were dropped in favour of fixed units, purely for structural rigidity reasons. The front air vent was the other design alteration made to the car prior to production.

Nonetheless, the car took three years to get into production as the engineering team changed the car's internal skeleton frame to steel to allow for further rigidity. The dashboard design was also changed, to a less futuristic but still sporting look.

Much of the development work was carried out in the United Kingdom, undergoing extensive testing at Lotus' Millbrook Proving Ground, despite the fact that the car was never intended for sale outside Japan.

Production

The car was made available to the buying public in January 1992, with two colour options, Siberia blue and classic red. Both colours came with Venetian gray lower panels. Each car was sold through the Autozam dealer network in Japan.

Unfortunately by the time car came into production, the recession in Japan had just come into force. Selling for 1,498 million ¥ (the equivalent of $12,400), it was slightly less than a Eunos Roadster, but marginally higher than its competitor, the Honda Beat, selling at 1,388 million ¥, and the Suzuki Cappuccino at ¥1,458 million, the AZ-1 was considered to be both too expensive and too cramped for a kei car. The car failed to sell within its target of 800 per month, in the midst of an economic recession. Production of the car ended after the following year, but Mazda had plenty of stock to sell off.

With a total production of 4,392 over a year, plus 531 Suzuki Cara, compared to 28,010 Cappuccinos and 33,600 Beats (both with production reaching into the latter half of the 1990s).

Model history and photograph may show different years or specifications. These are model-reference photographs, not vehicles offered for sale. No photographer or manufacturer endorsement is implied.

Sources and image credit

Structured record: Wikidata Q378799 · checked 2026-11-03. The At a glance table is drawn from that record; fields the record does not contain are omitted.

Text adapted from the English Wikipedia article “Autozam AZ-1” (en.wikipedia.org), CC BY-SA 4.0 · checked 2026-11-03.