Motorcycle · Yamaha
Yamaha TZR250: Yamaha's lance in the replica wars
Yamaha's lance in the replica wars. The Yamaha TZR250 is a sport-oriented, fully faired motorcycle manufactured by Yamaha from 1986 to 1995.

Yamaha TZR250 2MA.jpg · Borb · CC BY-SA 3.0
Unmodified image file; scaled to fit the page. Photo remains under its stated license.
At a glance
| Maker | Yamaha |
|---|---|
| Type | Motorcycle |
Racing
The TZR250 was still raced in the Yamaha Past Masters race series with the British racing club (BMCRC) as of 2024. Racing engines are currently claiming about 56 hp (42 kW) at 11,000 rpm. Racing fuel ratios typically 1:30. Standard exhausts are difficult to improve on in terms of power and torque, but they are very large and impede ground clearance. Jolly Moto (Italian after market exhaust maker) exhausts are popular replacements as they are lighter, produce similar performance while improving ground clearance.
An F3 racing kit was produced for a few years which included ignition boxes, carbs and exhaust, helping increase maximum revs, power and torque.
First generation
Production started in June 1986. At an introductory price of JP¥549,000 in Japan, the TZR250 was regarded as notably expensive for a 250 cc-class product. The parallel-twin 2MA model was the export variant produced for the UK, mainland Europe, as well as Oceania and Canada, while those bearing the 1KT model code were its domestic Japanese counterparts. To comply with Japanese laws stipulating an upper power limit of 45 hp for 250 cc motorcycles, the 1KT was fitted with a more restrictive CDI, giving its engine a lower state of tune than that of the 2MA in factory trim. Otherwise, variations between the two models were minimal (e.g., English versus Japanese labeling on the brake master cylinder). The lighting arrangement also differed to satisfy UK type approval regulations, particularly the indicators, which were mounted on stalks rather than faired into the bodywork. After the 2MA, the manufacturer sold subsequent models exclusively in Japan.
Second generation
In 1989, the parallel-twin, reverse-cylinder version arrived, designated 3MA (3MA1). In 1990, the 3MA received upside-down forks, as well as a differently shaped expansion chamber for more mid-range power at the expense of some top-end power (3MA3). Then, the timeframe from 1991 to 1995 saw the V-twin era (3XV).
Third generation
The 3XV came in several variants, differing in areas such as carburettors, ignition systems, clutch types, power-valve arrangements and cylinders. The principal model codes were TZR250R, TZR250RS, TZR250SP, and TZR250SPR. Individual sub-variants can be distinguished by differences in the number-board markings on the side panels and front fairing. They closely followed the engine configuration of the competition-only TZ250 of the time, sharing the same engine casings and frames and, in some models, the same cylinders, carburettors and power valves. Yamaha's official distribution of new TZR250 units for domestic sale ended just before the 2000s mainly due to emissions regulations. No further specification changes were implemented on the TZR250 nameplate following the pillion-capable 3XVC (TZR250SPR)'s January 1995 release.
Model history and photograph may show different years or specifications. These are model-reference photographs, not vehicles offered for sale. No photographer or manufacturer endorsement is implied.
Sources and image credit
Structured record: Wikidata Q8047779 · checked 2026-11-03. The At a glance table is drawn from that record; fields the record does not contain are omitted.
Text adapted from the English Wikipedia article “Yamaha TZR250” (en.wikipedia.org), CC BY-SA 4.0 · checked 2026-11-03.