GIZUMO Japan Motors

Motorcycle · Honda · Introduced 1992

Honda CBR900RR: Lightness as a weapon

Lightness as a weapon. The Honda CBR900RR, or Fireblade in some countries, is a 900 cc (55 cu in) sport bike, part of the CBR series introduced in 1992 by Honda. It was the first of a series of large-displacement Honda models to carry the RR suffix.

Honda CBR900RR model reference
1992 Honda Fireblade
Honda CBR900RR Fireblade 1992 cropped.jpg · PekePON (talk) · CC BY-SA 3.0
Unmodified image file; scaled to fit the page. Photo remains under its stated license.

At a glance

MakerHonda
TypeMotorcycle

CBR900RR (893cc) SC28

The first generation CBR900RR was introduced in 1992 with an 893 cc (54.5 cu in) inline-four engine. It set a precedent for lightweight in the superbike class, being much lighter than other large-displacement bikes of the time. The CBR900RR was based on an advanced research stage model known within Honda as the "CBR750RR". With the objective of equaling the acceleration of competitors’ flagship sport bikes, Honda increased the stroke of its inline 4-cylinder 750 cc engine and thus raised displacement to 893cc. Complementing its power performance was the bike's dry weight of just 185 kg, wheelbase of 1,405 mm, and a body almost identical to that of the advanced research stage model. At 205 kg (453 lb) wet weight, it was by just 1.8 kg (4 lb) heavier than the CBR600F2, while the next-lightest over-750cc machine, the Yamaha FZR1000, was heavier by 34 kg (76 lb).

Changes for the 1994 model comprise a new shift-drum to improve notchy gear shifts. The second-generation CBR900RR, which debuted in 1995, incorporated changes in damping rates and spring rates. The front fork was upgraded with a compression adjuster. The upper cowl stay went from steel to aluminum, and the cylinder head cover went from aluminum to magnesium. The styling of the bike also became more aggressive: The independent dual lights became irregular-shaped multi-reflector lights known as "fox eyes" set further back and covered to improve aerodynamics, and the bike had fewer of the RR's unique fairing "speed" holes. The footpegs were firmer and slimmer like that of the RC45 and the reversed pedal on the original was replaced with a shift linkage. Instead of measuring speed from the front wheel, the speed is measured from the countershaft sprocket with an electronic speedometer.

CBR900RR (919cc) SC33

1996 brought major changes to the CBR900RR with the third generation CBR900RR. To optimize rigidity Honda revised the suspension and chassis. Larger thinner-walled extrusions for more torsional rigidity were used in the swingarm and frame, revised shock and fork internals, and 5 mm (0.2 in) raised swingarm pivot. The handlebars were raised by 10 mm (0.4 in) and swept back by five degrees to improve the riding position. A 1 mm (0.04 in) bore increase raised the engine displacement to 919 cc (56.1 cu in). Other revisions included a smaller alternator, the addition of a throttle position sensor, extra clutch plates, and a larger exhaust.

The only changes for the 1997 model were graphics and colour options.

In 1998, Honda continued subtle refinements in the fourth generation CBR900RR's chassis. It got a stiffer frame more like the original, offset on the triple clamp reduced by 5 mm (0.2 in). It received a redesigned fairing, a new dual-reflector headlight design, new windscreen, mirrors, and rear cowl. The brakes got larger rotors on the front and new calipers and ergonomics were revised with raised footpegs. The engine got revised with 80 percent new internals in an effort to reduce friction and weight. Cylinders bore got an aluminum composites treatment and new pistons. A new instrument cluster includes an LCD tachometer and speedometer, and LCD readouts for temperature, odometer and two tripmeters. It also got a larger radiator and a new exhaust header in stainless steel.

CBR929RR (929cc) SC44

The fifth-generation CBR900RR, or CBR929RR in North America, was introduced in 2000. It has a completely new 929 cc (56.7 cu in) engine, more oversquare with lighter internals. The engine also featured fuel injection and larger valves set at a narrower angle. A new all-titanium exhaust system equipped with HTEV was incorporated. The swingarm is mounted to the engine with bracing under the engine. Larger front disk rotors 330 mm mounted were also fitted and the wheel diameter was increased from 16 inches to 17 inches. The new front fork now used upside-down construction.

Model history and photograph may show different years or specifications. These are model-reference photographs, not vehicles offered for sale. No photographer or manufacturer endorsement is implied.

Sources and image credit

Structured record: Wikidata Q763711 · checked 2026-11-03. The At a glance table is drawn from that record; fields the record does not contain are omitted.

Text adapted from the English Wikipedia article “Honda CBR900RR” (en.wikipedia.org), CC BY-SA 4.0 · checked 2026-11-03.