GIZUMO Japan Motors

Car · Mazda

Mazda RX-7: The rotary sports car, three generations deep

The rotary sports car, three generations deep. The Mazda RX-7 is a sports car which was manufactured and marketed by Mazda from 1978 to 2002 across three generations. It has a front mid engine, rear-wheel-drive layout and uses a compact and lightweight Wankel rotary engine.

Mazda RX-7 model reference
Mazda RX-7 pierwszej generacji
Mazda-rx7-1st-generation01.jpg · Taisyo · CC BY-SA 3.0
Unmodified image file; scaled to fit the page. Photo remains under its stated license.

At a glance

MakerMazda
TypeCar
EngineWankel engine

Second generation (FC)

The second-generation RX-7 (sometimes referred to as "FC", VIN begins JM1FC3 or JMZFC1), still known as the Mazda Savanna RX-7 in Japan, featured a complete restyling much like similar sports cars of the era such as the Nissan 300ZX. But upon closer inspection, it bears a striking resemblance to the Porsche 944. development team, led by Chief Project Engineer Akio Uchiyama , chose to focus on the American market when designing the FC, where the majority of first-generation of the RX-7 models had been sold. The team drew inspiration from successful sports cars that were popular at the time, such as studying the suspension design of the Porsche 928.

While the first-generation RX-7 was a purer sports car, the second-generation RX-7 tended toward the softer sport-tourer trends of its day, sharing some similarities with the HB series Cosmo. Handling was much improved, with less of the oversteer tendencies of the previous version. The rear end design was improved from the SA22's live rear axle to a more modern, independent rear suspension (rear axle). Steering was more precise, with rack and pinion steering replacing the old recirculating ball steering of the SA22. Disc brakes also became standard, with some models (S4: Sport, GXL, GTU, Turbo II, Convertible; S5: GXL, GTUs, Turbo, Convertible) offering four-piston front brakes. The rear seats were optional in some models of the FC RX-7, but are not commonly found in the American market. Mazda also introduced Dynamic Tracking Suspension System (DTSS) in the FC. The revised independent rear suspension incorporated special toe control hubs which were capable of introducing a limited degree of passive rear steering under cornering loads. The DTSS worked by allowing a slight amount of toe-out under normal driving conditions but induced slight toe-in under heavier cornering loads at around 0.5g or more; toe-out in the rear allows for a more responsive rotation of the rear, but toe-in allowed for a more stable rear under heavier cornering. Another new feature was the Auto Adjusting Suspension (AAS). The system changed damping characteristics according to the road and driving conditions, as well as compensating for camber changes and providing anti-dive and anti-squat effects.

In Japan, a limited edition second-generation infini RX-7 was available with production limited to only 600 cars for each year. Some special noted features for all Infini series are: infinity badge on the rear, upgraded suspension, upgraded ECU, higher power output of the engine, reduced weight, 15-inch BBS aluminium alloy wheels, ɛ̃fini logo steering wheel, aero bumper kits, bronze-coloured window glass, floor bar on the passenger side, aluminium bonnet with scoop, and front strut bar. The car was thought as the pinnacle of the RX-7 series (until the introduction of the third generation RX-7). The Infini IV came with other special items such as black bucket seats, 16-inch BBS wheels, Knee pads, and all the other items mentioned before. There are differing years for the ɛ̃fini, which denoted the series.

Series I was introduced in 1987, Series II was introduced in 1988, Series III was introduced in 1989, and Series IV was introduced in 1990. Series I and II came in White or Black exterior colour, Series III came in Shade Green only, and Series IV came in Shade Green or Noble Green exterior colours. There are only minor differences between the Series models, the biggest change which was from the Series I and II being an S4 and the Series III and IV being an S5.

The Turbo II model uses a turbocharger with a twin-scroll design, initially pumping out 25 percent more power than its naturally aspirated counterpart. The Turbo II also has an air-to-air intercooler which has a dedicated intake on the bonnet. The intake is slightly offset toward the left side of the bonnet. In the Japanese market, only the turbocharged engine was available; the naturally-aspirated version was only available for select export markets. This can be attributed to insurance companies in many Western nations penalizing turbocharged cars (this restricting potential sales). The Japanese market car produces 185 PS (136 kW) in the original version.

A minor change was made in April 1989, with the rear lamps being changed from square to three round lamps, changes made to the suspension, the door mirrors being made the same colour, changes to the front and rear bumpers and body mouldings, aluminium wheels, front seats, instrument panel centre, and instrument design. This engine was upgraded to 205 PS (151 kW) as part of the Series 5 facelift. The limited edition, two-seater ɛ̃fini model received a 215 PS (158 kW) version beginning in June 1990, thanks to an upgraded exhaust system and high-octane fuel.

Before full-change to FD model, the limited edition Winning Limited was released in September 1991. Based on the FC3S, 1,000 units of the final special edition "Winning Limited" model were released to commemorate the Mazda 787B's victory in the Le Mans 24 Hours race. It was only offered with the coupé body. It was available in standard colours, as well as optional colours such as dark green and bright red.

Third generation (FD)

The third-generation RX‑7, (sometimes referred to as FD, chassis code FD3S for Japan and JM1FD for the North America), featured an updated body design. Announced in October 1991, production began later that month before going on sale in December in the domestic Japanese market. Left-Hand-Drive export production began shortly after. The 13B-REW engine was the first-ever mass-produced sequential twin-turbocharger system to be exported from Japan, boosting power to 255 PS (188 kW; 252 hp) in 1992 and finally to 280 PS (206 kW; 276 hp) by the time production ended in Japan in 2002.

Model history and photograph may show different years or specifications. These are model-reference photographs, not vehicles offered for sale. No photographer or manufacturer endorsement is implied.

Sources and image credit

Structured record: Wikidata Q861634 · checked 2026-11-03. The At a glance table is drawn from that record; fields the record does not contain are omitted.

Text adapted from the English Wikipedia article “Mazda RX-7” (en.wikipedia.org), CC BY-SA 4.0 · checked 2026-11-03.